SASE Steel Cutters

Scarifier Tools

Steel Cutters

SASE Steel Cutters are used for removal of coatings for surface preparation without damaging the underlying surface. It is also good for road marking removal.

  • REMOVAL
  • FLOOR PREP
  • REMOVAL
  • FLOOR PREP

Next Steps

Get A Quote
Schedule a Demo

Product Options

Item # Product Description
15465 Small (Inner Dia. 12mm / 1/2”)
(Outer Dia. 32.5mm / 1 1.4”)
(Thickness 6.5mm / 1/4”)
Used with SC8E, FR200, FS200
615.01.02 Angle Cutter (Inner Dia. 16mm / 5/8”)
(Outer Dia. 41.12mm / 1 5/8”)
(Thickness 3.13mm / 1/8”)
Used with SC8E, FR200, FS200
615.01.04 Small (Inner Dia. 16mm / 5/8”)
(Outer Dia. 41.13mm / 1 5/8”)
(Thickness 3.25mm / 1/8”)
Used with SC8E, FR200, FS200
644.04.06 Large (Inner Dia. 15.6mm / 5/8”)
(Outer Dia. 50.13mm / 1 31/32”)
(Thickness 3.83mm / 9/64”)
Used with SC10E, VA25S, CPM10, SPS10
CHS.30.01 Large Tooth (Inner Dia. 26.4mm / 1 3/64”)
(Outer Dia. 75.5mm / 2 31/32”)
(Thickness 4.8mm / 3/16”)
Used with SC12E, VA30S, Truck Grinders
CHS.30.02 Large Tooth (Inner Dia. 29.8mm / 1 11/64”)
(Outer Dia. 75mm / 2 61/64”)
(Thickness 4mm / 5/32”)
Used with SC12E, VA30S, Truck Grinders

Product Options

15465
Small
(Inner Dia. 12mm / 1/2”)
(Outer Dia. 32.5mm / 1 1.4”)
(Thickness 6.5mm / 1/4”)
Used with SC8E, FR200, FS200
615.01.02
Angle Cutter
(Inner Dia. 16mm / 5/8”)
(Outer Dia. 41.12mm / 1 5/8”)
(Thickness 3.13mm / 1/8”)
Used with SC8E, FR200, FS200
615.01.04
Small
(Inner Dia. 16mm / 5/8”)
(Outer Dia. 41.13mm / 1 5/8”)
(Thickness 3.25mm / 1/8”)
Used with SC8E, FR200, FS200
644.04.06
Large
(Inner Dia. 15.6mm / 5/8”)
(Outer Dia. 50.13mm / 1 31/32”)
(Thickness 3.83mm / 9/64”)
Used with SC10E, VA25S, CPM10, SPS10
CHS.30.01
Large Tooth
(Inner Dia. 26.4mm / 1 3/64”)
(Outer Dia. 75.5mm / 2 31/32”)
(Thickness 4.8mm / 3/16”)
Used with SC12E, VA30S, Truck Grinders
CHS.30.02
Large Tooth
(Inner Dia. 29.8mm / 1 11/64”)
(Outer Dia. 75mm / 2 61/64”)
(Thickness 4mm / 5/32”)
Used with SC12E, VA30S, Truck Grinders