SASE Xenith 5" Pads

Resin Bond Diamond Tooling
Xenith 5" Pads
SASE Xenith 5” pads are for use when honing and polishing with SASE SC50 and other industry 5” hand grinders.
Downloads

Product Options
Product Options
HOL.2008115
5” Xenith Pad Lime - 30 grit
Can be used at the first step in grinding / polishing process. Will remove cure and seal.
HOL.200811
5” Xenith Pad Grey - 50 grit
Removes 30 grit scratches and can be used at the first step in grinding / polishing process. Will also remove cure and seal.
HOL.200812
5” Xenith Pad Black - 100 grit
Removes 50 grit scratches and can be used at the first step in grinding / polishing process on floors that are very flat.
HOL.200813
5” Xenith Pad Blue - 200 grit
Removes 100 grit scratches and will leave a honed matte finish.
HOL.200814
5” Xenith Pad Red - 400 grit
Removes 200 grit scratches and will leave a honed slightly matte finish.
HOL.200815
5” Xenith Pad White - 800 grit
Removes 400 grit scratches and will leave a polished, shiny finish.
HOL.200816
5” Xenith Pad Yellow - 1500 grit
Removes 800 grit scratches and will leave a polished, very shiny finish.
HOL.200817
5” Xenith Pad Green - 3000 grit
Removes 1500 grit scratches and will leave the highest polished finish.