SASE Xenith 7.5" Pads

Resin Bond Diamond Tooling
Xenith 7.5" Pads
SASE Xenith 7.5” pads are for use when honing and polishing with SASE PDG 6000 & 5000 and SASE SC70 hand grinder.
Downloads

Product Options
Product Options
HOL.3008505
7.5” Xenith Pad Lime - 30 grit
Can be used at the first step in grinding / polishing process. Will remove cure and seal.
HOL.300850
7.5” Xenith Pad Grey - 50 grit
Removes 30 grit scratches and can be used at the first step in grinding / polishing process. Will also remove cure and seal.
HOL.300851
7.5” Xenith Pad Black - 100 grit
Removes 50 grit scratches and can be used at the first step in grinding / polishing process on floors that are very flat.
HOL.300852
7.5” Xenith Pad Blue - 200 grit
Removes 100 grit scratches and will leave a honed matte finish.
HOL.300853
7.5” Xenith Pad Red - 400 grit
Removes 200 grit scratches and will leave a honed slightly matte finish.
HOL.300854
7.5” Xenith Pad White - 800 grit
Removes 400 grit scratches and will leave a polished, shiny finish.
HOL.300855
7.5” Xenith Pad Yellow - 1500 grit
Removes 800 grit scratches and will leave a polished, very shiny finish.
HOL.300863
7.5” Xenith Pad Green - 3000 grit
Removes 1500 grit scratches and will leave the highest polished finish.